| Vapor
Pro Specifications: |
| Sample Size |
10 mg to 20 g |
| Resolution |
1 ppm |
| Moisture Range |
10 ppm (or 10 micrograms water) to 100% |
| Results Display |
% Moisture, ppm Moisture, or micrograms Water |
| Ending Criteria |
Predict, Rate, and Time |
| Heating Range |
25 - 275 °C, Set in 1 °C increments and
maintained to ± 1 °C |
| Test Parameter Memory |
8 Programs |
| Program Identification |
Alphanumeric and/or symbols; programmable prompts
for lot or product ID numbers |
| Test Result Memory |
Data from last 30 tests |
| Statistical Calculation |
Mean, Standard Deviation, and Coefficient of Variation |
| Power Requirements |
100-120V ~ 50/60 Hz, 1 amp (standby) or 8 amps (heat
on),
or 220-240V ~ 50/60 Hz, 0.5 amp (standby) or 4 amps
(heat on) |
| Interfaces |
RS-232 (9-pin standard); parallel printer (LPT -
PC standard); 5 pin DIN connector for 101 key PC keyboard |
| Dimensions |
146mm H x 380mm W x 370mm D; 5.75" H x 15"
W x 14.5" D |
| Weight |
8.6 kg; 19 pounds |
| Warranty |
Two years, factory parts and labor (one year international) |
| Certifications |
U.S. and Canadian Underwriters Laboratory; European
Communities - CE |
| Accessories |
Keyboard; Printer; Analytical Balance; Carrying
Case; Compressed Air Pump; Temperature Calibration
Module
|
| Additional
Features: |
 |
Easy setup of product methods to ensure optimum
test results |
|
|
Starting temperatures are programmable and
maintained within ± 1 °C |
|
|
Continuous display of test time, current
temperature, programmed test temperature, current
microgram water measurement, and calculated moisture
content |
|
|
Flexible ending criteria to ensure accurate
test results |
|
|
Statistical features allow calculation of
mean, standard deviation and coefficient of variation |
|
|
NIST traceable multi-point temperature calibration |
