|
| Electronic Pressure and Differential Pressure Switches |
|
ONE Series - Electronic Pressure Switches |
|
Product Overview
- Digital display
- 100% adjustable set point and deadband
- All solid state design
- Remote and local "I AM Working®" status signal
- Captures and displays MAX/MIN process extremes
- Continuously stores HI/LO extremes
- Adjustable ranges:
- 0 to 4500 psig (310, 3 bar)
- 0 to 200 psid (13, 8 bar)
- -300 to 1000ºF -184 to 538ºC
- 4-20 mA output models available
- Division 1 (Intrinsically Safe) + Division 2 models available
Approvals: UL, cUL, CE, ATEX, GOST
|
|
|
ONE Series - 2 Wire
Electronic Pressure Switch |
 |
Product Overview
- Product Overview
- 2-wire connection to a PLC, DCS or Relay Coil; No additonal wiring required.
- 24 VDC, 115 VAC or Loop-Powered models are now available
- Field scalable 4-20mA models available (2WLP)
- Field adjustable set point and deadband, covering 100% of sensor range
- Temperature, Gauge Pressure and Differential Pressure sensors available
with all-stainless steel wetted parts
- Advanced programmable features including MAX/MIN capture, nuisance trip
filtering, clogged sensor detection and manual reset
- I Am Working® (IAW) self-diagnostics reported locally (on the switch
display) and remotely (in the control room)
- Class I Division 1 Intrinsically Safe (2W2D models only) and Division 2
(Non-incendive all models)
|
|
|
ONE Series - 4 Wire
10 AMP Electronic Pressure Switch |
|
Product Overview
- Accepts 90-130 VAC power; provides high-capacity local switching
- Solid-state relay switch output rating: 10 A @ 24-280 VAC
- Fully adjustable Set Point and Deadband; large LCD process display
- Type 4X epoxy-coated aluminum enclosure, polycarbonate faceplate
- Sensor ranges: Gage Pressure 0-4,500 PSI (310,3 bar); Differential Pressure
0-200 PSID (13,8 bar); Temperature -300 to 1000ºF (538ºC)
- Advanced features include IAW self diagnostics, min/max memory,
plugged port detection, switch delay and manual reset
- UL listed, Class I, Division 2 Groups A, B, C & D (Non-incendive)
|
|
ONE Series - 8 Wire
Dual Set Point Electronic Switch with 4-20mA Output |
 |
Product Overview
- All solid-state microprocessor controlled design
- Dual solid-state relay outputs provide independent SPST or SPDT switch action
- Independently programmable set point, deadband, and operating mode for each
switch output
- Local LCD digital display of the process variable, indication of trip points,and access to programmed parameters
- Patented I Am Working® (IAW) self diagnostics
- Field-scalable 4-20 mA analog output for process trending
- Class I, Division 2 rated
- Many switch output and sensor options
One Series 8W Product Specification
One Series 8W Installation & Maintenance
|
|
|
|
|
