Level

Universal IV - Continuous Level RF Transmitter

Overview

The Universal IV Continuous Level RF Transmitter from Drexelbrook is backward compatible with the industry standard Universal III™, Universal Lite™, Universal II™ and RCT™ Series and is the ideal solution for a wide array of applications. A few enhancements to the Universal IV Series include worldwide hazardous location approval, standard display/keypad, autoranging capabilities and state-of-the-art stable and accurate measurement.

Features:

The most versatile level technology for liquids, slurries, interface and granules measurement
Over 125 probe types for a wide array of applications, flex, rigid, wetted materials and process connections
2-wire, 4-20mA loop transmitter with the widely accepted digital HART protocol
Process temperature from cryogenic to 1000°F (537°C)
Process pressure from vacuum to 10,000 PSI (690 BAR)
Measurement span as short as 1” (25mm) to 800 ft (244m), no dead zone or blocked measurement areas
Proven Cote-Shield™ technology that ignores coating build-up on the probe
Immune to vapour, dust and foam interference
Immune to tank obstructions such as nozzles, ladders, pipes and agitators
Low cost of ownership, no maintenance, and no moving parts to wear out
Stable, repeatable, and accurate measurement within 0.25% of range
Built-in isolation and surge protection for increased reliability
Easy one-time calibration, configure it once and go
Free PC-based HRTWIN™ configuration software for initial setup from anywhere on the loop or a handheld HART®communicator can be used
Standard user friendly push-button LCD display for configuration and monitoring
Integral and remote installation. The transmitter can be integrated with the probe, or for harsh environmental conditions it can be installed remotely away from the probe/vessel
Worldwide approvals: FM, FMc, ATEX, IECEx and CE mark
Hazardous location approvals, Intrinsic Safety (IS) and Explosion Proof/Flameproof for Class I, Div I, and Zone 0 installations