For
Product Support Call: +44 (0) 118
9169411 or Email
The V-Cone flowmeter is available in a wide variety of configurations to meet the requirements of ANSI, DIN and JIS standards.
Use the following table to find the model, configuration and size best suited to your application.
| Models |
Configuration |
Sizes |
| VB |
Beveled Ends |
0.5" - 60" |
| VP |
Plain Ends |
0.5" - 60" |
| VT |
Threaded Ends |
0.5" - 6" |
| VS (L) |
ANSI B16.5 Raised Face Flanges -
Class 150 or 300 |
0.5" - 24" |
| VS (H) |
ANSI B16.5 Raised Face Flanges -
Class 600 or 900 |
0.5" - 24" |
| VS (X) |
ANSI B16.5 Raised Face Flanges -
Class 120 or 250 |
30" - 60" |
| VW (L) |
ANSI B16.5 Weld Neck, Raised Face Flanges - Class 150 or 300 |
0.5" - 24" |
| VW (H) |
ANSI B16.5 Weld Neck, Raised Face Flanges - Class 600 or 900 |
0.5" - 24" |
| VQ (L) |
ANSI B16.5 RTJ Slip-On Flanges -
Class 150 or 300 |
0.5" - 24" |
| VR (L) |
ANSI B16.5 RTJ Weld Neck -
Class 150 or 300 |
0.5" - 24" |
| VR (H) |
ANSI B16.5 RTJ Weld Neck -
Class 600 or 900 |
0.5" - 24" |
| VC |
DINSlip-On Flat Face Flanges |
0.5" - 24" |
| VJ |
JIS Slip-On - 10k or 20k |
0.5" - 24" |
| VI |
Insertion Saddles with ANSI Slip-On, Raised Face Flanges |
6" - 36" |
| VD |
Weld Neck Flanges -
DIN 2633 (PN16) or DIN 2635 (PN40) |
0.5" - 24" |
Sizes larger than 24" are available on most models on request.
Note
Each V-Cone is sized for the intended application. Specific performance ratings are obtained through the sizing process.
For dimensional data, propeller information and register options, contact us here.
For further
information please contact us here. |
